EZSync FTDI Chip Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, 1.5m, FTDI UC232R US232R Compatible, EZSync011
EZSync FTDI Chip Usb to RS232 Serial Adapter Cable with TX/RX LED, 9 Pin DB9 Male Connector, 1.5m, FTDI UC232R US232R Compatible, EZSync011 by EZSync at VPS Web Hosting Providers. MPN: EZSync011. Hurry! Limited time offer. Offer valid only while supplies last. Overview: Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync011 is a USB to RS-232 interface adapter
Every EZSync cable is built to last for years with high-quality industrial grade materials. EZsync011 is a USB to RS-232 interface adapter cable. No external power supply needed. Compatible with USB and RS-232 standards. EZsync011 is capable of performing the conversion from single-ended USB signal into UART signal of RS-232. DB9 male connectors are used for connection from RS-232 interface. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically. The converter is plug-and-play. Power indicator light and data traffic indicator light are also available with the converter for malfunction indication.
1. Standards: Conforming to USB Ver1.0, 1.1 and 2.0 and EIA RS-232.
2. USB signals: VCC, DATA+, DATA-, GND and FG.
3. RS-232 signals: DCD RXD TXD DTR GND DSR RTS CTS RI.
4. Working mode: asynchronous point-to-point.
5. Direction control: adoption of automatic data stream control for automatic recognition and control of data transmission direction.
6. Baud rate: 300 to 921.6Kbps, automatic detection of the transmission rate of the serial interface signal.
7. Interface protection: +-15KV electrostatic protection.
8. Interface : USB male(Plug) connector and DB9 male connector.
9. Transmission media: twisted-pair cable or shielded cable.
10. Diver software: Plug-and-play after Windows7, or please download the latest driver from FTDI website: http://www.ftdichip.com/Drivers/VCP.htm
Features & Highlights
- Unlike other cables on Amazon which are using PL2303 or CH431, this cable has a FTDI chip in it, most reliable, plug-and-play and no driver installation needed.
- 1.5m(60 inches) industrial grade USB to RS232 (DB9 Male) adapter cable. Integrated TXD/RXD LEDs to provide a visual indication of data traffic through the adapter.
- Shielded and transparent cable with in-line ferrite bead. Extra strength, low EMI and tangle free. RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND. Standard Windows baud rates (300bps to 921.6Kbps)
- Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
- Industry most reliable FTDI chip set & device drivers for maximum compatibility. Works with all Windows and Mac OS versions.
|Item Weight:||0.2 pounds|
|Item Size:||5 x 0.3 x 0.3 inches|
|Package Weight:||0.2 pounds|
|Package Size:||5 x 0.3 x 0.3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by EZSync, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Introduction: With quick and easy installation, free drive. This product is to cancel the pci slot and must use the PCI slot of the computer motherboard design. Will be idle pcie slot into two pci interface. Can be used to collect cards, gold cards, ...
mpn: BC79853, ean: 0799418887609,
Overview UT-885 is a universal USB to RS485 RS422 converter. It complies with USB, RS485 and RS422 standards. UT-885 converter provides connection for point to point, point to multipoint communication. For point to multipoint mode, each converter is...
mpn: SY-ADA40086, ean: 0804066791229,
This adapter is designed to hold one M.2 SSD in an drive bay by utilizing the additional bracket. This allows for data transfer over SATA III while keep the device secure in a drive bay.3.5" form Factor. Standard SATA III connection and 1 M.2 key. Fo...
mpn: ID-SC0V11-S1, ean: 0662774021461,
SIIG 4-Port Industrial grade USB to RS-232 Serial Adapter with 15KV ESD & power input surge protection per port, wall & DIN rail-mount equipped Interfaces/Ports - Input: 1, 4-pin, USB 2.0, Female - Input: 1, Terminal Block (3 Wire) - Input: 1, DC Jac...
mpn: 4328318513, ean: 0799418887203,
UT-216 complies with RS-232C, RS422, and RS-485 standards; it converts single side RS-232 signal to a balanced differential RS-422 or RS-485 signal. The built-in fast instant voltage restraint is designed to protect RS-422/RS-485 interface; it adopts...
Description: You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address, and from what I know about I2C, you cannot have two devices with the ...
At present, the chipset supporting the CNVI channel is known to have only the chipset motherboards such as H370, HM370, B360, H310, Q370, QM370, and CM246, and even the Z370 does not support the CNVI channel. ) About Bluetooth: The wireless module Bl...
mpn: Phoneix644747479851, ean: 0644747479851,
Features:Extend with 2 USB3.0 19pin connector (can expand 4 USB 3.0 ports) from desktop PC which with one free PCIe slot.SuperSpeed USB 3.0 is backwards compatible with USB 1.0/1.1/2.0 devices (data transfer rate at 1.5/12/480Mbps).SuperSpeed USB 3.0...
Description: Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator Mini USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: ...
mpn: DB26-L-B, ean: 0601263602316,
Product name : DB25 Male adapter; Total Size : 59 x 55.5 x 23mm/2.32" x 2.18" x 0.9"(L*w*h) Terminal hole diameter: 0.12''/3mm, terminal hole center distance : 0.2''/5mm Material : metal Nickel plated copper needle, electric part; color : black, G...